Top 9 Sharkbite Ice Maker Outlet Box

0

Finding your suitable readers for sharkbite ice maker outlet box is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for sharkbite ice maker outlet box including detail information and customer reviews. Let’s find out which is your favorite one.

806 reviews analysed

1. Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe

Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe

Feature

Description

Style:Without Water Arrestors

The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.

2. Eastman 60233 PEX Pre-assembled Ice Maker Outlet Box, 1/2 Inch Crimp PEX Connection with Installed 1/4-Turn Ball Valve, White

Eastman 60233 PEX Pre-assembled Ice Maker Outlet Box, 1/2 Inch Crimp PEX Connection with Installed 1/4-Turn Ball Valve, White

Feature

Description

This Eastman 60233 Pex Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

3. Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box, 1/2-Inch Sweat with Installed 1/4-Turn Ball Valve, White

Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box, 1/2-Inch Sweat with Installed 1/4-Turn Ball Valve, White

Feature

Description

This Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Sweat inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

4. Oatey 39130 1/2" FIP ICE Maker Box

Oatey 39130 1/2" FIP ICE Maker Box

Feature

Description

Product Description

12K ice maker box with nails preloaded. Right or left hand installation. Provides quick, safe water supply and shutoff for refrigerator ice maker and water dispenser. Valves comply with requirements of NSF 61, Section 9. No support needed. Box dimensions: 3.20″ W. x 4.15″ H. x 2.35″ D. Faceplate dimensions: 5.00″ W. x 5.89″ H. x .50″ D. U.S. patent No. D428.117. Canadian patent No. 90133. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.

From the Manufacturer

Oatey products can be found in residential and commercial applications and have achieved excellent brand name recognition with consumers. All products are backed with the highest quality technical and customer support programs in the industry

5. Eastman 60238 Crimp PEX Round Mini Pre-assembled Ice Maker Outlet Box, 1/2-Inch Connection with 1/4-Turn Ball Valve, White

Eastman 60238 Crimp PEX Round Mini Pre-assembled Ice Maker Outlet Box, 1/2-Inch Connection with 1/4-Turn Ball Valve, White

Feature

Description

This Eastman 60238 Crimp PEX Round Mini Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection

This outlet box comes complete with a 1/4-Turn Ball valve installed, pre-loaded reversible nails which provide a strong rigid mount, and a faceplate cover. It does not need a support bracket, and the outlet box can be installed to the left or right stud bay. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

6. Eastman 60234 Pre-assembled Ice Maker Outlet Box, 1/2-Inch CPVC with Installed 1/4-Turn Ball Valve, White

Eastman 60234 Pre-assembled Ice Maker Outlet Box, 1/2-Inch CPVC with Installed 1/4-Turn Ball Valve, White

Feature

Description

This Eastman 60234 Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch CPVC inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

7. Eastman 60237 Sweat Round Mini Ice Maker Outlet Box, 1/2-inch Sweat Connection with Installed 1/4-Turn Ball Valve, White

Eastman 60237 Sweat Round Mini Ice Maker Outlet Box, 1/2-inch Sweat Connection with Installed 1/4-Turn Ball Valve, White

Feature

Description

This Eastman 60237 Sweat Round Mini Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Sweat inlet connection

This outlet box comes complete with a 1/4-Turn Ball valve installed, pre-loaded reversible nails which provide a strong rigid mount, and a faceplate cover. It does not need a support bracket, and the outlet box can be installed to the left or right stud bay. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

8. SharkBite 25024 Plumbing Installation Kit

SharkBite 25024 Plumbing Installation Kit

Feature

Description

The SharkBite ice maker installation kit has everything you need to install the water supply to your ice maker. The kit includes 1 SharkBite 1/2 in. Service slip tee, one 1/2 in. X 1/4 in. (3/8 in. O.D.) push-to-connect angle stop valve, a 10 ft. Coil of 1/4 in. Pex pipe, one 1/4 in. (3/8 in. O.D.) SharkBite x 1/4 in. O.D. Compression connector, and a 1/2 in. And 1/4 in. Disconnect clip to remove the pipe from the fitting if needed. The SharkBite service slip tee allows you to remove up to 2 in. Of your existing copper or cpvc line and add an angle supply stop valve. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included 10 ft. Pex coil connects to the push-to-connect angle stop valve 1/4 in. Outlet and the 1/4 in. Ice maker connector which will thread onto your ice maker. The pipe can be cut to the exact length needed so there is no excess supply line to coil providing a clean, tangle free look.

9. Sharkbite 25031A Washing Machine Outlet Box with Water Hammer Arrestor, 1/2 inch x 3/4 inch MHT, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe

Sharkbite 25031A Washing Machine Outlet Box with Water Hammer Arrestor, 1/2 inch x 3/4 inch MHT, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe

Feature

Description

Style:With Water Hammer Arrestors

SharkBite Washing Machine Outlet Box with Water Hammer Arrestors
The SharkBite Washing Machine Outlet Box has SharkBite valves to allow for speedy installation of a washer in your laundry room using Copper, PEX, CPVC or PE-RT pipe. Included are water hammer arrestors to assist with water shockwave prevention. The box allows for easy valve access and operation and can be mounted to the left or right of the stud bay and needs no additional support framing. Forward mounted SharkBite Valves give easy access for on/off operation, providing safe water supply shutoff for washing machines. It can be used as a dual drain or inverted for center drain applications too.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite lead free quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.

Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

Conclusion

By our suggestions above, we hope that you can found Sharkbite Ice Maker Outlet Box for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general