Top 10 Flasher Relay For Ninja

0

We spent many hours on research to finding flasher relay for ninja, reading product features, product specifications for this guide. For those of you who wish to the best flasher relay for ninja, you should not miss this article. flasher relay for ninja coming in a variety of types but also different price range. The following is the top 10 flasher relay for ninja by our suggestions

783 reviews analysed

1. 2-Pin Electronic LED Flasher Relay FIX Motorcycle Turn Signal Bulbs Hyper Flash

2-Pin Electronic LED Flasher Relay FIX Motorcycle Turn Signal Bulbs Hyper Flash

Feature

Description

Main features:
effectively prevent the original car halogen light bulb changing LED turn the light to appear flashing too fast or not flash

Spec:
Operating Voltage: 12V (11V-15V)
Max Power: 150W
Flashing Frequency: 90 Times/Min
Switch Power: 0.02A to 12A
Operating Temperature: -40°C to +80°C
Work to replace most 2-pin flasher (if the wirings orders are different, you can always remove the white adapter to plug in the wires/pins directly)

Known Fitments:
Honda CBR600 CB900 CBR1000 VTX1300 VT1300
Suzuki GSX R600 R750 R1100 GSF600S GSF1200S
Yamaha YZF FZ WR
Kawasaki Ninja ZZR ZX VULCAN, etc

2. CEC Industries EF32 Electronic Turn Signal Flasher Relay, Round, 2 Prongs, 12 Volts

CEC Industries EF32 Electronic Turn Signal Flasher Relay, Round, 2 Prongs, 12 Volts

Feature

Description

Round, 2-Prong Electronic Flasher, replaces 552 or 536 flasher in most applications. Since the timing is electronically controlled, this flasher will flash at a constant rate, rather than depending on the load. For use with incandescent (regular) bulbs. If you need an LED-compatible flasher, please use model EF32RLNP instead.

3. 2-Pin 12V Motorcycle LED Turn Signal Flasher Relay Speed Adjustable Indicator

2-Pin 12V Motorcycle LED Turn Signal Flasher Relay Speed Adjustable Indicator

Feature

Description

With this 2-pin LED flasher, when install the LED bulbs for the motorcycle/bike turn signal lights, no need to cut the wires to install the load resistors and completely eliminate the LED rapid flashing problems.

And this LED Flasher is speed adjustable. You can use a flat head screw driver to adjust the knob on the bottom setting its flashing speeds from 50c/m to 200c/m.

Specifications:

Size: About 3.5 x 3.5 x 2.7cm (L x W x H)
Voltage: DC12V
Flashing Frequency: 50 times/min to 200 times/min
Power: 21W x 2 + 3.4W
Switch Power: 0.02A to 12A
Operating Temperature: -40°C to +80°C
Work to replace most 2-pin flasher
Package Weight: 10g
Package Size: 50*40*30mm

Package Contents:

1 x 2-Pin LED Turn Signal Flasher Relay

4. Custom LED Electronic LED Flasher Relay for LED Blinkers on Motorcycles – ELFR-1

Custom LED Electronic LED Flasher Relay for LED Blinkers on Motorcycles - ELFR-1

Feature

Description

Now you can finally fix the flash rate on your motorcycle with our unique Plug And Play solution! That’s right, our Electronic LED Flasher relay directly replaces the stock flasher relay on most Yamaha, Honda and Kawasaki motorcycles by plugging directly into the harness in place of the OEM flasher relay! See the compatibility list at http://www.CustomLED.com. For motorcycles with nonstandard two wire flasher relays (not on compatibility list), this flasher relay can still be used by removing the connector and hard wiring it. Even three wire flasher relays can be replaced if one of the wires is a ground wire. We also have a new connector option on our ELFR-1 QD model (click on ELFR-1 QD tab above). This unit is guaranteed to replace any two-wire flasher relay and operate at the normal DOT blink rate for motorcycles with stock blinkers, LED blinkers, or any combination of both, provided the total load on the system is within 0.05A to 10A (0.6 Watts to 120 Watts!) – which basically covers the majority of blinker products on the market! ***** NOTE: In some rare instances on certain motorcycles, when there are NO incandescent loads on the blinker system (LEDs front and rear), a problem called the 4-way blink problem may arise where all 4 blinker lamps blink at the same time like hazards. The 4-way blink problem has nothing to do with the flasher relay, and therefore must be solved independently. The flasher relay ONLY affects the speed of the blinkers, nothing more. Read more in our technical blog at: https://www.customled.com/blogs/custom-led-product-information/4-way-hazard-blink-problem-on-motorcycles-with-led-turn-signals. Also, Your motorcycle must have a rectified standard 12VDC negative common ground system for this flasher relay to work (most bikes are 12VDC). ****

5. CEC Industries EF34 Electronic Turn Signal Flasher Relay 3 Prong

CEC Industries EF34 Electronic Turn Signal Flasher Relay 3 Prong

Feature

Description

FLASHER

6. HKOO 2 PIN 12V Motorcycle Indicator Turn Signal Flasher Relay Fix Motorcycle LED Indicator Light

HKOO 2 PIN 12V Motorcycle Indicator Turn Signal Flasher Relay Fix Motorcycle LED Indicator Light

Feature

7. Custom LED Electronic LED Flasher Relay for LED Blinkers on Motorcycles – ELFR-1 QD

Custom LED Electronic LED Flasher Relay for LED Blinkers on Motorcycles - ELFR-1 QD

Feature

Description

Now you can finally fix the flash rate on your motorcycle with our unique Plug And Play solution! This unit is guaranteed to replace any two-wire flasher relay and operate at the normal DOT blink rate for motorcycles with stock blinkers, LED blinkers, or any combination of both, provided the total load on the system is within 0.05A to 10A (0.6 Watts to 120 Watts!) – which basically covers the majority of blinker products on the market! ***** NOTE: In some rare instances on certain motorcycles, when there are NO incandescent loads on the blinker system (LEDs front and rear), a problem called the 4-way blink problem may arise where all 4 blinker lamps blink at the same time like hazards. The 4-way blink problem has nothing to do with the flasher relay, and therefore must be solved independently. The flasher relay ONLY affects the speed of the blinkers, nothing more. Read more in our technical blog at: https://www.customled.com/blogs/custom-led-product-information/4-way-hazard-blink-problem-on-motorcycles-with-led-turn-signals. Also, Your motorcycle must have a rectified standard 12VDC negative common ground system for this flasher relay to work (most bikes are 12VDC). ****

8. Standard Motor Products RY116 Relay

Standard Motor Products RY116 Relay

Feature

9. 2-Pin LED Turn Light Flasher Relay 12V Universal Motorcycle Electronic Flasher Relay Emergency Led Light Indicator Light Flasher Relay

2-Pin LED Turn Light Flasher Relay 12V Universal Motorcycle Electronic Flasher Relay Emergency Led Light Indicator Light Flasher Relay

Feature

Description

Universal fit 2-Pin Electronic LED Flasher Relay for motorcycle/bike fixing the LED bulbs related turn signal light hyper flash, not function properly issues. By using this universal fit 2-pin LED flasher, you can install the LED bulbs for the motorcycle/bike for turn signal lights without adding the load resistors. It work for most Motorcycles such as Honda, Kawasaki, KTM, Suzuki, Yamaha and many other brands as well. A really good helper for you! 

As an responsible seller, we promise that 100% Money Refund/ New Replacement and within 24h online answer to your any questions. If your have any product issues, please do not hesitate to contact us. Just feel free to order our 2-pin Electronic LED Flasher Relay. We will satisfy you with our professional product and service! Sincere thanks for your browsing and support! 

Specifications:
Nominal Voltage:12V
Operating Voltage:11V-15V
Switch Current: Min. 0.05A – Max. 10A
Flashing Frequency:75-90times per min
Operating Temperature: -40°C to +80°C
Life Time: 400 working hours
Fitment: Work to replace most 2-pin flasher (if the wirings orders are different, you can always remove the white adapter to plug in the wires/pins directly)

Package Included:
1 × 2-pin Electronic LED Flasher Relay

Note:
1. Before ordering, please make sure the 2-pin configuration is the same as your vehicle’s. 
2. The LED flasher does not replace all flasher relay, failure to check this and installation in an incompatible vehicle can blow your fuse. 
3. Instruction is not included. If you have any questions about the product, please contact us or view our customers’ sharing experience. Much appreciate it. 

10. Gebildet 2 pieces 12V 3 Pin Electronic LED Flasher Relay 0.1W-150W c/m Motorcycle Turn Signal Adjustable Flasher CF-13KT, comes with 6pcs Terminals

Gebildet 2 pieces 12V 3 Pin Electronic LED Flasher Relay 0.1W-150W c/m Motorcycle Turn Signal Adjustable Flasher CF-13KT, comes with 6pcs Terminals

Feature

Description

Package including
2pcs LED flasher Relay
6pcs blue wire connector

Features:
✪Suitable for flasher light during car turning;
✪High sensitive and stable electronic timing;
✪Wide operating voltage, temperature range and long life
✪Standard terminals, usage and Replacement easily;
✪With ticking sound when it works, no buzzing
Technical Data:
Life Time: 400 hours continuous use
Rated Voltage:12VDC
Operating Voltage:11VDC ~ 15VDC Switch Load: 0.1W ~ 150W
Max Power:150W
Flashing Frequency:60 ~ 90 times per minute
Operating Temperature:-40°C ~ +80°C

Conclusion

By our suggestions above, we hope that you can found Flasher Relay For Ninja for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general